registrar@vssut.ac.in +91 8480441756

ବୀର ସୁରେନ୍ଦ୍ର ସାଏ ବୈଷୟିକ ବିଶ୍ୱବିଦ୍ୟାଳୟ

वीर सुरेंद्र साई प्रौद्योगिकी विश्वविद्यालय

Veer Surendra Sai University of Technology

profile

Prof. Saroj Kumar Sarangi

Professor

Qualification : Post Doctoral Research in NCKU Taiwan, Ph.D in IIT Kharagpur, M.Tech. in NIFFT Ranchi, B. E. in UCE Burla

Specialization : CVD Diamond Coating, High Speed Machining, Joining metal-Ceramics

91-82607-43222 sarojsarangi@gmail.com

Post Doctoral Research in NCKU Taiwan, Ph.D in IIT Kharagpur, M.Tech. in NIFFT Ranchi, B. E. in UCE Burla

CVD Diamond Coating, High Speed Machining, Joining metal-Ceramics

18 years

Graduate Level :
  1. Robotics and Flexible Manufacturing (RFM)
  2. Machine Dynamics-I (MD-I)
  3. Manufacturing by Shaping and Joining (MSJ)
  4. Engineering Mechanics (EM)
  5. Mechanics of Materials (MM-I)
  6. Advanced Manufacturing Technology (AMT)
  7. Mechanical Measurement and Control (MMC)
  8. Manufacturing Science and Technology (MST-I)
  9. Product Design and Production Tooling (PDPT)
  10. Introduction to Nanotechnology (IN)
  11. Manufacturing Science and Technology (MST-II)
Post Graduate Level :
  1. Quality Control and Reliability (QCR)
  2. Robotics and Flexible Manufacturing (RFM)
  3. Composite Materials (CM)
  4. Machine Tool and Technology (MTT)
  5. Tool & Dies Design (TDD)
  6. Experimental Techniques for Thermal Engineering (ETTE)
  7. Modeling and Analysis of Manufacturing Systems (MAMS)
  8. Computer Integrated Engineering (CIM)
  9. Theory of Machining and Grinding (TMG)
  10. Non-Traditional Manufacturing Processes (NTMP)

  1. High Sped Machining
  2. CVD Diamond Coating
  3. UBMS PVD hard coatings
  4. Ceramic-metal brazing
  5. Thermal conductivity measurement techniques in Nanocoatings
  6. CVD Graphene Growth

Ph. D. Candidates : 4 awarded and 2 are continuing
M. Tech. Candidates : 30 completed and 2 is continuing
  1. Post Doctorate in Department of Micro Electronics, National Cheng Kung University, Tainan, Taiwan
DATA TO BE UPDATED...
  1. Funding Agency (Scheme) Year : DST (SERC)-2007Title : Design, Development and Fabrication of a CVD set-up for diamond coating on cemented carbide cutting tool inserts for machining non-ferrous materialsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 18.36Status - completed / ongoing : Completed
  2. Funding Agency (Scheme) Year : AICTE (RPS)-2008
    Title : Characterization of Hot Filament Chemical Vapour Deposition (HFCVD) diamond coated carbide inserts
    PI/Co-PI : PI
    Duration(years) : 2.0
    Amount Sanctioned(In Lakhs) : 5.50
    Status - completed / ongoing : Completed
  3. Funding Agency (Scheme) Year : DST (FIST)-2008Title : Development of Mechanical Engineering LaboratoryPI/Co-PI : Co-PIDuration(years) : 5.0Amount Sanctioned(In Lakhs) : 70.00Status - completed / ongoing : Completed
  4. Funding Agency (Scheme) Year : AICTE (RPS)-2009
    Title : Biasing and Nucleation study by addition of metal powders on growth of diamond by Hot Filament Chemical Vapor Deposition (HFCVD) method on cemented carbide inserts
    PI/Co-PI : PI
    Duration(years) : 3.0
    Amount Sanctioned(In Lakhs) : 6.49
    Status - completed / ongoing : Completed
  5. Funding Agency (Scheme) Year : AICTE (MODROB)-2010
    Title : Modernization of  Material Research Laboratory
    PI/Co-PI : Co-PI
    Duration(years) : 1.5
    Amount Sanctioned(In Lakhs) : 7.56
    Status - completed / ongoing : Completed
  6. Funding Agency (Scheme) Year : AICTE (RPS)-2012Title : Development of nano/ultranano diamond coating on cemented carbide inserts by Hot Filament Chemical Vapor Deposition (HFCVD) methodPI/Co-PI : PIDuration(years) : 2.0Amount Sanctioned(In Lakhs) : 14.10Status - completed / ongoing : Completed
  7. Funding Agency (Scheme) Year : CSIR-ERD-2013Title : Development of NCD and UNCD diamond coatings and their characterization on cemented carbide insertsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 21.92Status - completed / ongoing : Completed
  8. Funding Agency (Scheme) Year : UGC-MRP-2013Title : Development of a high vacuum brazing furnace for joining metals to ceramicsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 14.97Status - completed / ongoing : Completed

International Publications

  1. A. Jena, S. K. Pattnaik, S. K. Sarangi, The performance of advanced cutting tools used for dry machining of aluminium, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, 2.2 SCIE, 46 (2024) 441, 10.1007/s40430-024-05025-3
  2. A. Jena, B. B. Palei S. K. Pattnaik, S. K. Sarangi, AFM, Nano-indentation and TEM characterization study of HFCVD diamond on Tantalum and Diamond seeded cemented carbide inserts, Int. J. Refractory Metals and Hard Materials, Elsevier Science, 3.6 SCI 118 (2024) 106503, 10.1016/j.ijrmhm.2023.106503
  3. A. Jena, S. K. Pattnaik, B. B. Palei, S. K. Sarangi Synthesis of diamond crystal growth on tungsten carbide inserts by HFCVD using various seeding powders Applied Physics A, Springer 2.584 SCI 128 (2022) 287 10.1007/s00339-022-05417-z
  4. L. R. Bhandarkar, P. P. Mohanty, S. K. Sarangi Experimental study and multi-objective optimization of process parameters during turning of 100Cr6 using C-type advanced coated tools Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1.762 SCOPUS 235 (2021) 7634-7654 10.1177/09544062211043144 journals.sagepub.com/home/pic
  5. L. R. Bhandarkar, M. Behera, P. P. Mohanty, S. K. Sarangi Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools Measurement, Elsevier Science 3.464 SCOPUS 172 (2021) 108842 February 2021 https://doi.org/10.1016/j.measurement.2020.108842
  6. S. K. Pattnaik, M. Behera, S. Padhi, P. R. Dash, S. K. Sarangi Study of cutting force and tool wear during turning of aluminium with WC, PCD and HFCVD coated MCD tool Manufacturing Review, EDP Sciences 1.44 SCOPUS 7 (2020) 27 August 2020 https://doi.org/10.1051/mfreview/2020026
  7. M. Behera, A. Jena, S. K. Pattnaik, S. Padhi, S. K. Sarangi The effect of transition-metal seeding powder on deposition and growth of diamond synthesized by hot filament chemical vapor deposition processes on cemented carbide substrates and its characterization Materials Chemistry and Physics, Elsevier Science 3.47 SCOPUS 256 (2020) 123638 August 2020 10.1016/j.matchemphys.2020.123638
  8. D. K. Sahu, S. K. Sarangi, K. U. Sri Influence of substrate bias on performance of diamond coating on WC cutting inserts for machining of aluminium by HFCVD process International Journal of Materials Engineering Innovation, Inderscience SCOPUS 11 Issue 4 (2020) 293-308 https://dx.doi.org/10.1504/IJMATEI.2020.112096
  9. S. Padhi, M. Behera, S. K. Pattnaik, S. K. Sarangi Diamond Thin Film Coating on WC Substrate by HFCVD Method using Different Seeding Powders and Its Characterization International Journal of Recent Technology and Engineering SCOPUS 8 Issue-2 (2019) 5175-5180 10.35940/ijrte.B3169.078219
  10. R. Kumar, S. K. Pattnaik, J. K. Minz, S. Padhi, S. K. Sarangi Influence of cutting parameters on cutting forces and surface roughness in dry turning of Al. using PCD and different coated tools Sadhana, Academic of Sciences, Springer 0.592 44 (2019) 186 10.1007/s12046-019-1155-4Sadhana(0123456789().,-volV)F]T(30123456789().,-volV)
  11. S. K. Pattanik, N. K. Bhoi, S. Padhi, S. K. Sarangi Dry machining of aluminium for proper selection of cutting tool: tool performance and tool wear The International Journal of Advanced Manufacturing Technology, Springer 1.568 98 (2018) 55 10.1007/s00170-017-0307-0
  12. P. R. Dash, K. Ray, S. K. Sarangi, P. K. Pradhan Analysis of Static Instability of an Asymmetric, Rotating Sandwich-Beam Advances in Acoustics and Vibration Open Access 2012 (2012) 191042 10.1155/2012/191042
  13. S. K. Sarangi, A. Chattopadhyay, A.K. Chattopadhyay Influence of process parameters on crystal growth of diamond on cemented carbide substrates by HFCVD system Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 31 (2012) 1 10.1016/j.ijrmhm.2011.07.007
  14. A. K. Chattopadhyay, P. Roy, S. K. Sarangi Study of wettability test of pure aluminum against uncoated and coated carbide inserts Surface and Coatings Technology, Elsevier Science 2.135 204 (2009) 410 10.1016/j.surfcoat.2009.07.038
  15. P. Roy, S. K. Sarangi, A. Ghosh, A.K. Chattopadhyay Machinability study of pure aluminium and Al-12% Silicon alloys against uncoated and coated carbide inserts Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 27 (2009) 535 10.1016/j.ijrmhm.2008.04.008
  16. A. K. Chattopadhyay, P. Roy, A. Ghosh, S. K. Sarangi Wettability and machinability study of pure aluminum towards uncoated and coated carbide cutting tool inserts Surface and Coatings Technology, Elsevier Science 2.135 203 (2009) 94110.1016/j.surfcoat.2008.08.047
  17. A. Chattopadhyay, S. K. Sarangi, A. K. Chattopadhyay Effect of negative dc substrate bias on morphology and adhesion of diamond coating synthesised on carbide turning tools by modified HFCVD method Applied Surface Science, Elsevier Science 2.711 255 (2008) 1661 10.1016/j.apsusc.2008.04.065
  18. S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment, seeding and interlayer on nucleation and growth of HFCVD diamond films on cemented carbide tools Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 26 (2008) 220 10.1016/j.ijrmhm.2007.05.002
  19. S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment methods and chamber pressure on morphology, quality and adhesion of HFCVD diamond coating on cemented carbide inserts Applied Surface Science, Elsevier Science 2.711 254 (2008) 3721 10.1016/j.apsusc.2007.10.104

International Conferences

  1. L. R. Bhandarkar, N. K. Goswami, M. K. Behara, P. P. Mohanty, S. K. Sarangi, Investigation and modeling of process parameters during the machinability study of AISI 52100 using advanced coated and uncoated tools, AIP Conference Proceedings 2341, (2021) 040021 DOI: 10.1063/5.0050318
  2. S. K. Pattnaik, M. Behera, S. Padhi, S. K. Sarangi, Comparison between advanced cutting tools to achieve a better cutting condition for the machining of aluminium, 7th International & 28th AIMTDR Conference, 13th-15th December, 2018, Anna University, Chennai
  3. A. R. Khan, N. K. Bhoi, S. K. Pattnaik, S. K. Sarangi, Machinability Study of Bearing Steel using Advanced Cutting Tools, 6th International & 27th AIMTDR Conference, 16th-18th December, 2016, COE Pune ISBN: 978-93-86256-27-0
  4. N. K. Bhoi, A. R. Khan, S. K. Pattnaik, S. K. Sarangi, A Comparative Study of Chip Morphology, Surface Roughness and Tool Wear of Machining Rolled Aluminum using the Advanced Cutting Tools, 6th International & 27th AIMTDR Conference, 16th-18th December, 2016, COE Pune ISBN: 978-93-86256-27-0
  5. S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay, Nucleation and growth of diamond by different seeding mechanisms on cemented carbide inserts by HFCVD process, 5th International & 26th AIMTDR Conference, 10th-12th December, 2014, IIT Guwahati ISBN: 978-8-19274-612-8
  6. S. K. Sarangi, A. K. Chattopadhyay, Wettability study of aluminum on various cutting tool substrates, 4th International & 25th AIMTDR Conference, 14th – 16th December 2012, Jadavpur University ISBN: 978-93-82062-92-9
  7. A. K. Chattopadhyay P. Roy, S. K. Sarangi, Study of wettability test of aluminum against coated carbide inserts, Paper Poster Presentation on 6th Coatings Science International Conference, June 28 - July 2, 2010 Noordwijk, The Netherlands
  8. S. K. Sarangi, A. Chattopadhyay, A. K.Chattopadhyay, Nucleation and growth of diamond by different seeding materials on cemented carbide inserts by HFCVD method, 2nd International AIMTDR Conference, 15th -17th December 2008, IIT Madras ISBN: 978-81-904235-7-1

National Conferences

  1. S. K. Sarangi, D. K. Sahu, S. Padhi, Peculiarity of carbon atoms, Advances in Mechanics & Materials, RAMM-2012, Civil Engineering Department, 25th -26th Feb. 2012
  2. A. Chattopadhyay, S. K. Sarangi, A. K. Chattopadhyay, Effect of Negative DC substrate Bias on morphology and adhesion of diamond coating on carbide turning tools by modified HF-CVD method, RAMTM-2010, Production Engg. Dept., Jadavpur on 19th-20th Feb 2010
  3. S. K. Sarangi, A. Chattopadhyay, A. K.Chattopadhyay, HF-CVD diamond coating of carbide inserts and its performance evaluation, COPEN-2005, Jadavpur, Published in December 2005
  4. S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay, Effect of chamber pressure on morphology, quality and adhesion of HFCVD diamond coating on cemented carbide inserts, 21st AIMTDR National Conference 2004, Vellore
  5. K. P. Narzary, S. K. Sarangi, A. K. Chattopadhyay, Effect of substrate surface treatment on adhesion of diamond coating and performance evaluation of diamond coated tool, AMS National Conference 2003, Kolkata
  6. P. Roy, A. Ghosh, S. K. Sarangi, A. K. Chattopadhyay, On dry machining of Aluminium with coated carbide tool, 20th National AIMTDR Conference 2002,Ranchi
DATA TO BE UPDATED...
  1. “Development of HFCVD Diamond Tool for machining non-ferrous materials” by LAMBERT Academic Publishing on 11th August 2016. ISBN-13: 9783659924453, ISBN-10: 3659924458, EAN: 9783659924453.
1. One week QIP sponsored Short Term Course (STC) on Recent Advances in Manufacturing Engineering (RAME) was organized from 18th – 23rd April 2016. 2. One week Online Faculty Development Programme (FDP) on Recent Developments in Surface Coatings and its Application in Manufacturing (RDSCAM) sponsored by TEQIP-III from 07th – 11th September 2020. 3. One week Short Term Training Programme (STTP) on Recent Advances in Non-Linear Manufacturing Engineering sponsored by AICTE New-Delhi in 2019. The Revenue generated was 330000.00 INR.
* Dean Centre for Distance and Continuing Education (CDCE) continued from 17th February 2024 till 01st July 2024. * Chairman of Central Purchase Processing Committee (CPPC) continued from 13th December 2023 till 17th February 2024. * Dean Sponsored Research and Industrial Consultancy (SRIC) continued from 19th October 2022 till 17th February 2024. * PIC, Central Library continued from 28th July 2022 till 1st December 2022. * Coordinator, Central Research Facility (CRF) continued from 25th November 2021 till 30th November 2022. * Vice President (VP), Students Technical Society (STS) continued from 14th April 2021 till 05th November 2022. * Professor-In-Charge (PIC), Institute Seminar (IS) continued from 02nd April 2021 till 01st December 2022. * Head of the Department (HOD) continued from 17th November 2016 to 26th August 2019. * Professor In-Charge (PIC) of Central Transport Facility (CTF) continued from 28th August 2015 to 18th November 2016. * Superintendent In Charge of Central Workshop continued from 1st January 2010 to 07th February 2011 and from 29th September 2011 to 27thAugust 2015. * Vice President, Audio Visual Club from August 2011 to July 2012. * Vice President, Robotics Club from August 2009 to July 2011. * Warden of Vasistha Hall of Residence (North Hostel) from 1st April 2009 to 10th January 2011. * Assistant Warden of South Hostel (Marichi Hall of Residence) from 11th August 2007 to 31st March 2009.
  • Reviewer for international journal “Applied Surface Science”, Elsevier Science
  • Reviewer for international journal “Surface and Coating Technology", Elsevier Science
  • Reviewer for international journal "Vacuum", Elsevier Science
  • Secretary, VSSUT Alumni Association from 18th September 2021 and continuing
 
Present Address : 
Dr. Saroj Kumar Sarangi, Qr. No. M4R/8, Professor, Mechanical Engineering Department VSSUT Burla, Sambalpur-768018, Odisha Phone: +91-82607-43222 E-Mail: sarojsarangi@gmail.com		   Permanent Address : 
Dr. Saroj Kumar Sarangi C/o Shri. R. C. Sarangi Plot No. 2132/4814 (B) Nageswar Tangi Post: Kedargouri Bhubaneswar-751002, Odisha Phone: +91-674-2434541